Click image to view full size image
1. Main Features:
1.Totally EU streamlined design, Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
2.Hydraulic synchronised positive stop design,and by DELEM programmable controller assuring accurate repeatability &ease of use.
3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.
4.Inverter with da41 System operated back gauge with quality support fingers also with vertical adjustment
5.Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
6.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.
2. Standard Equipment:
●Delem DA41CNC control System
●Powered Depth Y-axis&V-axis&Back gauge X-axis (X-axis 0.1mm/Y-axis 0.1mm)
●Servo motor control block
●HIWIN Ball screws & Polished rod with 0,1mm accuracy.
●Plate Support Arms
●Germany Bosch-Rexroth Hydraulic
●Germany EMB Tubing connector
●Germany Siemens Main Motor
●Tele mecanique/Schneider Electrics
●Hydraulic &Electrical overload protection
●Top and Bottom Tooling(86°,R0.6mm)
●Safety Standards(2006/42/EC)
3. Safety Equipment:
1.EN 12622:2009 + A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009
●Front finger Protection(Safety light curtain)
●South Korea Kacon Foot Switch(Level 4 of safety)
●Back metal safe fence with CE standards
●Safety relay with Monitor the pedal switch and safety protection
4. Delem DA41 CNC Control system:
|
●Servo control technology; ●4.7 high light light liquid crystal display screen with multi languages interface including Chinese; ●Tooling parameters setting, bending angle programming; ●About 100 programs are stored, and there are 25 operations in each program; ●The escaped material is programmable, the processing quantity is accountable; ●There is memory to power off ,and conversion between metric system and inches system. ●Backguage position display, resolution in 0.01mm The best bending results you ca bend longer and deeper parts with standard AC/MB-Bend Series. |
|
5. Specifications:
6.Main Configuration：
|
1. Main configuration list |
|||
|
1- |
NC Control system |
■DA41 System□E10NC System |
|
|
2- |
Electrical components |
Schneider Electrical from French |
|
|
3- |
Main Motor |
Siemens from Germany |
|
|
4- |
BackGauge & RAMDrive |
Inverter from Taiwan delta |
Accurate positioning control |
|
5- |
Ball screw/ Liner guide |
HOLLAND DELEM |
|
|
6- |
Foot switch |
KACON from South Korea |
|
|
7- |
Travel switch |
Schneider Electrical from French |
|
|
8- |
Hydraulic System |
Bosch-Rexroth form Germany |
|
|
9- |
Hydraulic Pump |
Sunny-America |
Optional |
|
10- |
Tubing connector |
EMB form Germany Brand |
|
|
11- |
ManualCrowning system |
Pls inquire us |
Optional |
|
12- |
Three color Alarm Lamp |
■Yes □No |
|
|
2.Safety Configuration |
|||
|
1- |
Warning of high oil temperature |
■Yes □No |
|
|
2- |
High oil pressure protection |
■Yes □No |
|
|
3- |
Motor overload protection |
■Yes □No |
|
|
4- |
Laser Safety Protection |
□Yes ■No |
|
|
5- |
Left & Right side protection |
■Yes □No |
Fixed type(metal) |
|
6- |
Electricity leakage protection |
■Yes □No |
|
|
7- |
Safety Relay |
■Yes □No |
|
|
8- |
Monitoring and Redundant valves |
■Yes □No |
|
|
9- |
Safety standards |
■CE □CSA □NR-12 □OSHA |
|
http://www.cnc-beke.com/